•Single-Suction Rotor - Balanced with Coupling by Pulleys
•Cantilever type, belt drive structure, belt wheel mounted on the outside of the two supporting bearing seats. Suitable for medium and above fan with variable speed, easy to disassemble the pulley.
•For double-suction rotors being driven by a pair of pulleys, the use of support bearings of the double-supported type or central rotor (Center Hung) is mandatory.
•The supplier provide the equipment with a metal base which will allow CUSTOMER to build a flat concrete base (with neither housing fittings nor bearing overhangs).
•The equipment will be supplied fully assembled on its metal base.
•The shaft design allow the disassembly of the two bearings on the coupling side without the need of disassembling the rotor.
Model No. | Special design | Foundation arrangement | Steel structure |
Motor Power | 15KW~ 1000KW | Concrete foundation with anchoring bolts | |
Driven type | Belt driven | Option accessories | Filter , silencer, expansion joints, |
Impeller size | Up to 2000mm | inlet/outlet damper | |
Dimension | Special design | Pneumatic /electric actuator | |
Flow | Up to 300,000 m3/h | Monitoring instruments for the Bearings | |
Pressure | Up to 20,000Pa | Material | Carbon steel / Stainless steel |
Gas Temp. | -20~250℃ | Cooling type | Air/water |
Speed | Up to 3600RPM | Seals type | Labyrinth / Carbon ring |
Frequency | 50/60Hz | HS code | 841459 |
Voltage | 380V/440V/465V/6000V | Standard | GB/ASME/ISO/CE/IEC/NEMA |