• This construction will be used for fans with rotor diameter greater than 1,600 mm in double suction.
• The rotor is supported on two bearings, whereas these bearings are on opposite sides in relation to the rotor (double-supported).
• The concrete base will feature cut-outs and/or overhangs for an improved fit of the machine and a reduction in the amount of concrete needed to build it. It will be up to the supplier to manufacture and supply a metal base destined to secure the bearing as well as to be used as the motor rail.
• The supplier will carry out the pre-assembly in its factory, correcting any possible manufacturing faults as required, in such a way to avoid delays during final assembly
| Model No. | Special design | Foundation arrangement | Steel structure |
| Motor Power | 110KW~ 8000KW or larger | Concrete foundation with anchoring bolts | |
| Driven type | Direct by coupling | Option accessories | Filter , silencer, expansion joints, |
| Impeller size | Up to 4000mm | inlet/outlet damper, | |
| Dimension | Special design | Pneumatic /electric actuator, | |
| Flow | Up to 1500,000 m3/h | Monitoring instruments for the Bearings | |
| Pressure | Up to 30,000Pa | Material | Carbon steel / Stainless steel |
| Gas Temp. | -20~500℃ | Cooling type | Air/water |
| Speed | Up to 3600RPM | Seals type | Labyrinth / Carbon ring/ N2 sealing |
| Frequency | 50/60Hz | HS code | 841459 |
| Voltage | 380V/440V/465V/6000V/11000V | Standard | GB/ASME/ISO/CE/IEC/NEMA |
